No vents above you.
The system has no vents and no ducts. The panel exchanges heat with the room’s surfaces by radiation, so the ceiling stays a plain ceiling.
Radiant panels that warm and cool the surfaces of a room. No vents, no ducts, and no fan or compressor indoors.
Arrange an appointmentStria 18 in Graphite. Rendered model.
Water, warmed or cooled outdoors, runs through a slim aluminium panel. The room settles around it.
An outdoor heat pump sets the water temperature. Indoors, heat moves by radiation between the panel and the room’s surfaces, not by blowing air.
600 by 1800 mm of aluminium fins.
Stria 18 in Natural, the demo model. Also made 1200 mm tall, or 900 mm wide.
90 mm from the wall.
Measured from the wall to the front edge of the fins.
The pipes stay inside the wall.
They come down inside the wall from the ceiling and meet the panel at a single fitting.
Nothing moves the air.
There is no fan in the room. Heat passes between the panel and the surfaces around it.
The system has no vents and no ducts. The panel exchanges heat with the room’s surfaces by radiation, so the ceiling stays a plain ceiling.
Five anodised finishes, set against dark wood, leather and stone. Any other colour is made to order.
Indoors there is no fan and no compressor. The compressor sits in the outdoor unit, away from the bedroom.
Felt temperature is roughly the average of air and surface temperature. With the walls at 22 °C, air at 27 °C feels about 24.5 °C.
Illustrative photograph
Choose a finish, a size and how it is mounted. The panel follows your choice.
Stria 18 in Obsidian, 600 × 1800 mm, on the wall. About 420 W cooling and 510 W heating (demo figures).
Arrange a private appointmentSee the panels under the showroom lights, with water running through them, and bring a sample of your wood or stone. An appointment takes about an hour.